 |

|
Radio Speaker Recone Kits |
| Each kit contains the parts needed (not including adhesives) to recone 1 speaker. Each kit contains
raw speaker parts that must be assembled and glued in your frame. THESE ARE NOT DROP
IN READY KITS. |
| These kits DO NOT fit all 4" and 5" speakers that were ever made. Variations in voice coil
diameter and frame depth can make these kits unsuitable for your specific speaker. If these kits
will not fit your speaker, I'd recommend you send your speaker to a reconer of your choice as you may
need a special order voice coil. |
| Be sure that the inside diameter of the voice coil in the kit will fit your speaker
BEFORE purchasing a kit. The measurement of the voice coil you are replacing must
be EXACT. Being off by just a few .001" will make the difference in this kit working for
you or having a voice coil rub the frame. |
| Be sure you are up to the task of reconing before purchasing a kit. It's not a difficult thing to do, but
requires patience and care to get it done right the first time. |
| Use my Contact page for kit availability and purchasing instructions
before ordering any kits. |
| Speaker parts require proper alignment for proper fit and operation. They are glued
permanently in place during assembly. No warranty can be provided. |
| No exchanges, refunds or credit for kits that have been altered, damaged or glued. |
Each recone kit includes the following:
- 1 Cone
- 1 Voice coil
- 1 Spider
- 1 Felt dust cover
- 6" Tinsel wire
|
Price for each 4" and 5" kit is $22.00.
Price includes shipping to continental US only.
NJ residents add 7% Sales Tax |
| 4" recone kit kit |
| Cone | 3.875"OD x .6"deep x .5"VCID |
| Cupped Spider | 1.5"OD x .15"ht x .5"VCID |
| Voice Coil | 4 ohms .573"ID x .6"ht x .16"WW |
|
| 5" recone kit kit |
| Cone | 4.75"OD x .6"deep x .5"VCID |
| Cupped Spider | 1.5"OD x .15"ht x .5"VCID |
| Voice Coil | 4 ohms .573"ID x .6"ht x .16"WW |
|